Here is SILVER2 APOLLO Core Update for the Vampire V600 V2

Please note the update will reprogram your VAMPIRE. The update will take several seconds.

The Apollo-Team it not liable for any problem, failures or data loss. Please note that you will do the update on your own personal risk. Turning the computer off during the update, a power-outage or other failure can render your Vampire non-operational.

Please note that if your turn the Vampire non-functional as described because of powerloss - you can get the Vampire operational again by using an external flash device. This device is not included and must be purchased separately. 

This package includes *.jic files and they can be flashed to Vampire V2 using USB blaster and Altera Quartus Programmer 13.1 or with VampireFlash, ApolloFlash tools found in SAGA drivers package.

This archive contains following versions of SILVER2 APOLLO Core:

V3_3053_C7_x11.jic // 77.99MHz
V3_3053_x12.jic // 85.08MHz
V3_3053_x13.jic // 92.17MHz
V3_3053_x14.jic // 99.26MHz
V3_3053_x15.jic // 106.35MHz
V3_3053_x16.jic // 113.44MHz

*** Note ***
Hight speed cores might not work in all Vampire 600 V2 cards. Some of them are more power hungry than the others.
Also keep in mind differences in FPGA, even from the same series. No matter what speed grade they are they are specific and unique and each performs differently.
Your best bet is x11 core. 

*****************************************
For more info please visit www.majsta.com